Jaden Glass Ltd Security in Glass
Ballistic glass test panel showing three impact points with no penetration

Guide

Is there such a thing as bullet proof glass?

Strictly, no: no glass stops every bullet. What people call bullet proof glass is bullet resistant glass, laminated security glass that has been tested to stop a stated weapon and round. This guide explains how it works, how thick it is, and what to ask for when you buy bullet proof windows, doors or screens.

The short answer

Bullet resistant, to a stated level

Bullet proof glass is the name almost everyone uses, and it is what most people type into a search engine. The trade calls it bullet resistant glass or ballistic glass, and the difference is not just politeness. Given a heavy enough weapon, or enough shots in the same place, any glass will eventually fail.

What a good product offers is a rating: proof from a controlled test that a sample stopped a particular round, fired at a particular speed, a set number of times. In the UK and Europe that test is BS EN 1063, and the result is a class from BR1 to BR7, or SG1 and SG2 for shotguns. A pane that holds a BR4 rating will stop the BR4 test rounds. It makes no promise about anything heavier.

So the honest answer to "is it bullet proof?" is another question: against what? Once that is settled, choosing the glass is straightforward.

How it works

How glass stops a bullet

Bullet resistant glass is not one thick slab. It is a sandwich, and each layer has a job.
  1. Layers of glass

    Several sheets of glass take the first impact. As they crack they flatten and slow the bullet, spreading its energy across a wider area of the pane.

  2. Polycarbonate and interlayers

    Between the glass sit polycarbonate sheets and PVB interlayers. They bond the build together, flex rather than shatter, and soak up what the glass has not already absorbed.

  3. The safe side

    For no spall glass, a final thin layer is added to the protected face. It holds in the fragments that would otherwise fly off the back of the pane into the room.

The more energy a round carries, the more layers it takes to stop it. That is why a rifle class is so much thicker than a handgun class, and why the frame has to be designed around the weight of the glass.

How resistant

What each level stops, and how thick it is

The BS EN 1063 classes, the threat each is tested against, and the thickness of Jaden no spall glass at that class.
BS EN 1063 classes and Jaden glass thickness
Class Tested against Jaden thickness (NS)
BR1 Resists a .22 LR sporting rifle round. 22mm
BR2 Resists a 9mm Luger handgun round. 23mm
BR3 Resists a .357 Magnum handgun round. 28mm
BR4 Resists a .44 Magnum handgun round. 36mm
BR5 Resists a 5.56x45mm assault rifle round. 38mm
BR6 Resists a 7.62x51mm rifle round. 43mm
BR7 Resists a 7.62x51mm hard-core armour-piercing rifle round. 73mm
SG1 Resists a 12 bore shotgun slug (one shot). 24mm
SG2 Resists a 12 bore shotgun slug (three shots). 38mm

Ballistic glass is under constant development, including its weight and thickness, so please check current specifications before ordering.

For most UK commercial premises the realistic armed threat is a handgun, which is why BR4 is the class asked for most. Rifle classes, BR5 to BR7, are for buildings where a security adviser has identified a rifle as a credible threat. Our guide to ballistic glass ratings from BR1 to BR7 explains the test, the bullet codes and how to choose a level in full.

Windows, doors and screens

Bullet proof glass is only part of a bullet proof window

BS EN 1063 rates the glass on its own. A bullet proof window, door, screen or section of curtain walling is a whole assembly: the frame, the fixings, the glazing beads and the depth of glass held in the frame all have to match the class of the pane.

Complete assemblies are tested under the companion standards BS EN 1522 and BS EN 1523, which give the classes FB1 to FB7 and FSG. A BR4 pane in an ordinary frame is not a BR4 window. If you are buying the whole opening, ask for the assembly rating as well as the glass rating.

Ordinary glass

Why toughened and laminated glass are not enough

Toughened glass is several times stronger than ordinary glass, but when it does break it breaks completely, into small pieces, and it has no rating against bullets.

Standard laminated glass, the kind used in shopfronts and car windscreens, holds together when broken and resists a brick or a hammer for a while. It is not built or tested to stop a bullet.

Bullet resistant glass is laminated too, but with far more layers, polycarbonate in the build, and a test certificate to show what it stops.

Buying

Five things to ask for

Whoever you buy from, these are the questions that separate a rated product from a description.
  1. The class

    A BS EN 1063 class, BR1 to BR7 or SG1 and SG2, not just the words bullet proof.

  2. The spall rating

    S or NS. If people sit or stand close behind the glass, specify no spall.

  3. The certificate

    The test report for the product being supplied, from an independent test house.

  4. The assembly

    For a complete window, door or screen, the BS EN 1522 rating of the whole unit.

  5. The installation

    Fixing to the manufacturer's glazing details, so the frame holds the glass the way it was tested.

If a product is sold as bullet proof but cannot show a class, ask what it was tested against. A class and a certificate are the only answer that means anything. Jaden supplies ballistic glass to BS EN 1063 in every class from BR1 to BR7 and both shotgun classes, in spall and no spall builds.

Common questions

Bullet proof glass questions, answered

Is bullet proof glass the same as bullet resistant glass?
Yes, in everyday speech. Bullet proof is the phrase most people search for; bullet resistant or ballistic glass is what the industry calls it, because every rating has limits. Both mean laminated security glass tested to stop a stated weapon and round.
How thick is bullet proof glass?
It depends on the class. Jaden no spall ballistic glass runs from 22mm at BR1, the lowest class, to 36mm at BR4, the class most UK commercial buildings use, and 73mm at BR7, the highest. Ballistic glass is under constant development, including its weight and thickness, so please check current specifications before ordering.
Can bullet proof glass stop a rifle?
Glass rated BR5, BR6 or BR7 under BS EN 1063 has been tested against rifle rounds, up to a 7.62 mm round with a hardened steel core at BR7. Glass rated BR1 to BR4 has not been tested against military rifles, and should not be relied on to stop one.
How many shots will it stop?
The test fires three shots into a triangle with 120 mm sides (one shot for the SG1 shotgun class), and none may get through. That is what the rating proves. Beyond it, every additional hit weakens the glass further, which is why the class should be chosen with some margin.
Is toughened glass bullet proof?
No. Toughened glass is several times stronger than ordinary glass, but when it fails it breaks into small pieces all at once, and it offers no rated protection against bullets. Bullet resistant glass is laminated: many layers bonded together so it holds in place as it absorbs the impact.
Does a bullet proof pane make a bullet proof window?
Not on its own. BS EN 1063 rates the glass. A complete window, door or screen is rated as an assembly under BS EN 1522 and BS EN 1523, because the frame, fixings and edge cover all have to match the glass.

Sources

  • BS EN 1063:2000, Glass in building. Security glazing. Testing and classification of resistance against bullet attack. British Standards Institution.
  • BS EN 1522:1999 and BS EN 1523:1999, Windows, doors, shutters and blinds. Bullet resistance. Requirements and classification; Test method. British Standards Institution.
  • Jaden Glass Ltd product data for construction and thickness by class. See the ballistic glass thickness table.

Last reviewed 5 November 2026. This guide is general information and is not a substitute for a threat assessment or for the test certificates of the product you buy.

Need bullet resistant glass for a project?

Email info@jadenglass.com or call +44 (0)777 962 8185.

Send an enquiry